Robinair CAP VALUE
nibbler uses a punch and die to make the cut, this is perfect for tight radius cuts into steel. The cutter can be set in 8 positions to make cutting easier. A .87 in. starter hole is all that is needed to start or start from the edge of the material. A nib
nibbler uses a punch and die to make the cut, this is perfect for tight
radius cuts into steel. The cutter can be set in 8 positions to make
cutting easier. A .87 in. starter hole is all that is needed to start
or start from the edge of the material. A nibbler is also what you need
if you are cutting corrugated metal. The 6890 nibbler can cut 16 gauge
steel and 18 gauge stainless. When perfect cuts are what you need, look
to the Milwaukee line of nibblers
Features
- 3.8
amp, 1,900 spm - Cuts
up to 7 ft. per minute - 0.87
in. starting hole required - AC-DC
paddle switch
Specifications
| Voltage | 120 AC/DC |
| Amps | 4.0 |
| No Load Speed |
1,900 SPM |
| Capacity in Steel |
16 Ga. |
| Capacity in Stainless |
18 Ga. |
| Cord Type |
8 ft. Fixed |
| Construction Type |
Double Insulated |
| Switch Type |
Paddle |
| Trigger Lock |
— |
| Minimum Cutting Radius |
1-3/4 in. |
| Starting Hole |
7/8 in. |
| Length | 11-1/4 in. |
| Tool Weight |
4.8 lbs. |
| Shipping Weight |
6.3 lbs. |
Milwaukee Electric 6890 16 Gauge Nibbler 6890
Reviews
There are no reviews yet.