The Kent-Moore J-26941 Bushing and Bearing Remover is a heavy-duty tool designed to remove bushings and bearings from 3-4 inch bores. It is made of steel for durability and features a 1-1/2 inch diameter rod with a threaded end for attaching to a slide hammer or other pulling device. The tool also has a 3-1/2 inch diameter concave face with serrated edges to grip the bushing or bearing and facilitate removal.

Key Features

• Heavy-duty steel construction for durability
• 1-1/2 inch diameter rod with threaded end for attaching to a slide hammer or other pulling device
• 3-1/2 inch diameter concave face with serrated edges to grip the bushing or bearing and facilitate removal

Applications

The Kent-Moore J-26941 Bushing and Bearing Remover is designed for use on 2010 Camaro with Aisin or Tremec transmissions. It can be used to remove bushings and bearings from 3-4 inch bores.

Benefits

• Removes bushings and bearings from 3-4 inch bores
• Heavy-duty construction for durability
• Easy to use with a slide hammer or other pulling device

Instructions for Use

1. Align the concave face of the tool with the bushing or bearing to be removed.
2. Attach the tool to a slide hammer or other pulling device.
3. Apply force to the slide hammer or pulling device until the bushing or bearing is removed.

Cautions

• Do not use the tool on bores larger than 3-4 inches.
• Use caution when applying force to the slide hammer or pulling device.
• Do not use the tool if it is damaged.

To learn more about the Kent-Moore J-26941 Bushing and Bearing Remover, please visit our website.